# Checking your Tie-Up

The tie-up display is an information only screen that can be useful to double check that the tie-up as called for in the WIF has been done correctly.  The simple shaft number list per treadle is a good double-check to avoid errors in the cloth due to tie-up. Simply sit on your loom bench, press each treadle and looking at the tie-up screen verify that the correct shafts move.  You may have to use the scroll down arrow to see additional treadles. In the TempoTreadle screen picture below,  treadle 1 is tied to shafts 1 and 2;  treadle 2 to shafts 3 and 4, etc.

<figure><img src="/files/3lw0egEzuZXwlEyC6k59" alt=""><figcaption><p>Tie-Up Information</p></figcaption></figure>


---

# Agent Instructions: Querying This Documentation

If you need additional information that is not directly available in this page, you can query the documentation dynamically by asking a question.

Perform an HTTP GET request on the current page URL with the `ask` query parameter:

```
GET https://learning.loftyfiber.com/tempotreadle/tempotreadle-automatic-tracking-for-your-loom/setup-for-a-weaving-project/checking-your-tie-up.md?ask=<question>
```

The question should be specific, self-contained, and written in natural language.
The response will contain a direct answer to the question and relevant excerpts and sources from the documentation.

Use this mechanism when the answer is not explicitly present in the current page, you need clarification or additional context, or you want to retrieve related documentation sections.